DR

Veterinary X-ray Equipment DR-MNF200C Introduction Vet DR, also known as a pet digital radiography system, is professionally used for digital X-ray examination of pets, with the computer reconstructing the image and then making a series of post-processing. It is a must-purchased equipment…

In Stock

Description

Veterinary X-ray Equipment DR-MNF200C

Introduction

Vet DR, also known as a pet digital radiography system, is professionally used for digital X-ray examination of pets, with the computer reconstructing the image and then making a series of post-processing. It is a must-purchased equipment for high-end and mid-high-end pet hospitals, and it performs X-ray imaging of different parts of pets to assist vet doctors in timely and accurate diagnosis and treatment.

Specification

Item Parameters
Working conditions of the photographic system (1) Environmental conditions:
Operating temperature: 10℃~40℃
Relative humidity: 30%~75%, non-condensing
(2) Power supply conditions
Power supply voltage: single-phase 220VAC±10%, 50Hz
High voltage generator (1) Output power: 22KW
(2) Tube voltage range: 40~125kV
(3) Tube current range: 10mA~320mA
(4) Load time range: 1.0ms~10000ms
(5) Maximum inverter frequency: 200kHz
(6) mAs Rang: 0.1~100mAs
(7) Maximum power: 22KW
(8) Power supply: single-phase 220VAC±10%, 50Hz
High-end tube (1) Nominal tube voltage: 40KV~125KV
(2) Focus: 1.0mm/2.0mm
(3) Focus power:
small focus ≥20KW
large focus ≥40KW
Flat panel detector (1) Material: amorphous silicon cesium iodide
(2) Effective imaging area: 427mm x427mm
(3) Acquisition matrix: 3072 x 3072 pixels
(4) Pixel size: 140μm
(5) Image read-out time: ≤7S
(6) Spatial resolution: 3.7lp/mm
Beam limiter (1) LED beam light
(2) Time limit for indicator light: 30±3s
(3) Inherent filtration: 1.0 mm Al.EQ.
(4) Maximum irradiation field: ≥430 mm x 430 mm when SID (FFD) = 1000mm
(5) Minimum irradiation field: 0mm x 0mm
(6) Operation mode: manual knob adjustment
Mechanical device performance (1) Bed size: 1220mm×640mm, (±50mm)
(2) The height between the bed surface and the ground: 670mm, ( ±50mm)
(3) The maximum bearing capacity of the bed surface: 70kg
(4) Distance  from  focus  to  detector  (SID):  1000mm, ( ±50mm)
(5) Horizontal and vertical floating range of the bed surface: 110mm, ( ±55mm)
(6) Horizontal and horizontal floating range of the bed surface: 350mm, (±175mm)
Pet  workstation software (1) Screen size: 21.5 inches
(2) Type: LCD
(3) Resolution (pixel matrix): 1920 x 1080
(4) CPU: Intel Pentium G4400 processor
(5) Memory: 4GB
(6) Hard disk: 500G
(7) DVD burning: available
Software functions (1) Software direct exposure control
(2) Patient management
(3) Image processing
(4) Film printing

Packing Details:

wooden case 1750*800*841mm   G.W:200KG